12 Inch Manual Impulse Heat Sealer for Plastic Bags

Product Description: - Thicker bags require a higher level setting; Level 3 is suitable for most applications - The red light is not predictable upon plugging in; it only becomes predictable when the handle is depressed, serving as a protective feature for the sealer - After sealing is complete, the red light will turn off; do not release the handle immediately, but instead keep it pressed down for a few seconds for best results. For 12-inch sealers, placing your hand in the middle of the handle is recommended - Replace worn or discolored PTFE (cloth) and those that cause imperfect sealing - Do not clean the heat seal strip with a wet cloth

Step-by-Step Instructions: Step 1: Plug the sealer into power Step 2: Adjust the sealing timer to 1-8 according to the bag thickness; Level 3 or 4 is suitable for most bags Step 3: No warm-up time needed, place the bag flat on the machine Step 4: Press down on the sealing machine's arm; optimal results are achieved when the signal light turns off automatically and the handle is kept pressed down for a few seconds

Sealing Machine Replacement Guide: 1. Loosen the screws on the sealing machine using the provided tools 2. Remove the old heat sealing strip and heating element 3. Install the new heat sealing element 4. Tighten the screws for immediate use; no warm-up time required, lightweight design, 8 temperature adjustment levels for different materials and bags

Important Note: This machine cannot cut bags.

Manual Impulse Sealer: - Equipped with a built-in fuse for safe usage - Easy to operate and clean, ideal for household, retail, grocery stores, and industrial sealing - Place the bag on the seal, press the handle down for 2-3.5 seconds for optimal results - Energy-efficient, non-toxic, odorless, durable, and capable of sealing over 10,000 bags - 100% satisfaction guarantee; contact us for any issues for a satisfactory solution.

product information: